This article will guide you through mounting your NEXC2 dash cam to your vehicle.
If you are unsure where and how you should stick your dash cam, see our suggestions below:
For road view cameras, behind and to the right of your rearview mirror works best.
Wherever you choose to stick the camera, make sure to install it in a place where it will not interfere with the driver’s visibility or safety.
Do not install the camera on or near where airbags may be present or go off. If you are uncertain of where your vehicle’s airbags are located, contact your vehicle’s manufacturer.
In order to prevent damage, do not install the camera on a sun control film (i.e. window tint).
Learn How to Mount and Install Your NEXC2 Dash Cam in Your Vehicle
Here are the steps on how to mount and install the NEXC2 dash cam in your vehicle:
1. Installing the cable, mount, and charger
Insert the USB cable into the matching slot on the NEXC2's power port and onnect the other end of the charging cable to the USB charger and plug the charger into your car's power socket.
Start the car to turn the camera on. The camera will power on when your car is running and power off when you stop your car then Follow the instructions in the app to pair your phone with the dash cam.
2. Attaching the NEXC2 to the windshield
Pick an installation area on your windshield and make sure it’s clean. We recommend placing the NEXC2 behind the rearview mirror. Remove the sticker from the camera's lens.
Set the camera’s angle and adjust the screw at the side of the rotating head to secure it in place.
3. Hiding the cables
To install the cable neatly, start in the passenger seat. Gently pull down the ceiling fabric near the windshield, tuck the cable under, or use cable clips. Continue by feeding the cable through the door seal, behind the glove compartment, and under the floor mat. Finally, connect it to the USB charger near the power socket for a seamless setup.
That's it, you're all set!
You may also watch this video to learn how to install your NEXC2 from start to finish
Relevant Articles