This article will help you troubleshoot your NEXS1 and NEXC1 in case you experience issues with the automatic recording feature.
What to Do When the NEXS1 or NEXC1 Does Not Automatically Start Recording
If you're experiencing problems with NEXS1 or NEXC1's automatic streaming and recording features, follow these steps:
Please ensure that you are only using the original cable, mount, and Nexar-provided power accessory that came with the camera to avoid any potential issues.
1. Ensure the power plug is correctly inserted into the power source
2. Disable VPN, hotspots, wireless Android Auto/Carplay, and security apps.
3. Verify that all required permissions are correctly set.
4. Turn off Low Power Mode (iOS) or Power Saving Mode (Android) in the phone's Settings app.
5. Background App Refresh should be enabled in the phone settings
6. In the Nexar Classic app, go to More > Dash cam and make sure the "Automatic dash cam connection" or "Automatically start streaming" toggle is enabled.
7. For iOS users: Ensure that the "Phone's battery optimization" toggle is disabled.
8. Take a few test drives to check if the issue is resolved.
If the problem persists, follow these steps:
1. Restart your phone and NEXS1 or NEXC1
2. Turn on the phone's Bluetooth and WIFI until the dash cam shows a connected status in the app
3. Turn your phone's WIFI and Bluetooth OFF and then back ON.
4. Make sure the NEXS1 or NEXC1 Wi-Fi networks appear in your phone settings.
5. Perform a few test drives to confirm if the issue is resolved.
If you still encounter difficulties, reach out to our support team. Sharing the date and time of the affected drives will be helpful for the investigation.
What to Do When the NEXS1 or NEXC1 Does Not Automatically Stop Recording
If you are experiencing issues where the NEXS1 or NEXC1 continues to record in the app even when you're done driving, take note of the following:
If you are using the cigarette lighter adapter on a regular powered port, the NEXS1 or NEXC1 turns off after the car is turned off.
If your NEXS1 or NEXC1 is connected to a continuous power port or on a Hardwiring Kit, it will go into a sleep state after a few minutes of inactivity.
Please do the following to make sure your NEXS1 or NEXC1 and Nexar Classic app will stop recording when you're done driving:
1. Plug the NEXS1 or NEXC1 to power
2. Turn on the phone's Bluetooth and WIFI until the dash cam shows a connected status in the app
3. Open the Nexar Classic app, then go to More, then tap Dash cam, and enable the Continuous power port toggle
4. Go to your phone's settings app, then enable Motion & Fitness (for iOS) or Physical Activity (for Android)
If you still encounter difficulties, reach out to our support team. Sharing the date and time of the affected drives will be helpful for the investigation.
How to Deal With Random Drive Recordings
If you're receiving drive-started notifications or hard brake notifications from the Nexar Classic app when you're not driving with NEXS1 or NEXC1, follow these steps:
1. Ensure the power plug is correctly inserted into the power source and properly connected to the dash cam
2. Enable the "Continuous power outlet" toggle in the app.
3. Turn on the "Motion & Fitness" (for iOS) or "Physical Activity" (for Android) permission for the Nexar Classic app in your phone settings.
Monitor the Nexar Classic app's behavior after following these instructions. If you still encounter difficulties, reach out to our support team. Sharing the date and time of the affected drives will be helpful for the investigation.