Skip to main content
NEXS1 Making Constant Beeping Noise
Updated over 7 months ago

This article will help you troubleshoot in case you experience issues with the NEXS1 dash cam making constant beeping noises.


Troubleshooting NEXS1 Making Constant Beeping Noises

If you’re experiencing issues with your NEXS1 dash cam continuously making a beeping noise, simply follow these steps:

Please ensure that you are only using the original cable, mount, and Nexar-provided power accessory that came with the camera to avoid any potential issues.

1. Unplug the dash cam from its power source.

2. Press and hold the power button for 20-30 seconds or until the dash cam turns off.

3. If the beeping noise stops, plug the dash cam back to power.

4. Disable VPN, hotspots, wireless Android Auto/Carplay, and security apps.

5. Check that WIFI and Bluetooth settings are enabled and not connected to any other device, network, or another Nexar dash cam.

6. Enable the phone's cellular data and ensure you have good cellular reception.

7. Open the Nexar Classic app > More > Dash cam and update the firmware.

This should prevent the beeping from happening again.

However, if the issue persists, please reach out to our support team for further assistance. Sharing a short footage of the dash cam's behavior will be very helpful.


Did this answer your question?