Your dash cam comes with helpful voice prompts that keep you informed about what's happening with your device. These friendly audio notifications let you know when:
Something needs your attention
An action is completed successfully
Any errors occur
These voice cues are designed to give you peace of mind while driving, allowing you to focus on the road while staying informed about your dash cam's status.
When Does Each Sound Play?
Your camera will be restarted intentionally as part of its installation flow:
> Plays if the firmware update fails to download or progress a firmware image after several attempts.
Attention! Due to high temperature, your camera will be temporarily shut down:
> Plays when the device overheats and shuts down.
Your camera is being activated:
> Plays when the activation process starts after internet connectivity is established.
Your camera is being charged before activation is started:
> Plays once while waiting for the battery level to be sufficient during activation.
Your Nexar dash cam is currently preparing for activation. This process may take up to 5 minutes. Please ensure that your dash cam remains connected to power:
> Plays once when the system starts and detects the camera is not activated.
Starting dash cam activation:
> Plays once when the camera is confirmed eligible for remote activation.
Dash cam activation in progress:
> Plays during activation up to 4 times, as long as there's an LTE connection.
Your dash cam is now activated and will restart to complete the setup:
> Plays after successful activation, before the camera reboots.
Your dash cam failed to activate. Please contact Nexar Support for further assistance:
> Plays up to 3 times if the camera fails to activate after having an LTE connection.
A stronger cellular signal is needed to activate your dash cam. Move to an area with better reception:
> Plays every few minutes if the camera loses connection or there's no internet during activation.
No connection available:
> Plays if there's no LTE connection during boot or activation, up to 5 times.
New firmware available. Updating firmware now:
> Plays before installing a new firmware update.
Emergency notification sent:
> Plays 30 seconds after an impact is detected.
No movement detected. Activating parking mode:
> Plays when the camera shuts down due to inactivity.
Please turn off camera, reconnect LTE connectivity add-on firmly, and turn camera on:
> Plays if LTE USB failures exceed a limit during monitoring.
Emergency notification cancelled:
> Plays if a collision notification is canceled by pressing the button.
High impact detected. Notifying your emergency contacts in 30 seconds. Tap the power button to cancel:
> Plays when an impact is detected.
Double Tap:
> Plays when the power button is double-clicked to release WiFi from the Veniam stack.
Older Versions:
Dash cam not activated:
> Plays every few minutes if the camera is not activated.
Your dash cam is now activated. Drive safely:
> Plays when the camera is successfully activated.
Relevant Articles: