This guide will teach you how to enable and disable the audio recordings in the app and NEXS1 and NEXC1 dash cam.
How to Enable and Disable NEXS1 and NEXC1 Audio Recordings
To enable or disable audio recordings in your NEXS1 or NEXC1 dash cam footage, follow these steps:
1. Make sure your phone is connected to your NEXS1 or NEXC1. To check this, open the Nexar Classic app and make sure that the main page says Detected right below the dash cam banner
2. While on the Nexar Classic app, tap More and then select Dash cam
3. Turn on or off the Record audio toggle
4. Start a drive and let it record for a few minutes
5. Check the end footage to ensure that the audio corresponds to the setting that you chose
Please note that any changes on the Record audio toggle affect both the Nexar Classic app and NEXS1 and NEXC1 dash cam recordings and the change set only takes effect on video recordings after the change. Once a recording has been saved, you won't be able to add or remove the audio anymore.
Having Trouble With the Audio Recording on Your NEXS1 or NEXC1?
Use our troubleshooting instructions for NEXS1 and NEXC1 to help in case you get into a bumpy road.