Skip to main content
All CollectionsPersonalGeneral Product InformationNexar Classic App
Pairing or Connecting Multiple Nexar Dash cams with Nexar Classic
Pairing or Connecting Multiple Nexar Dash cams with Nexar Classic
Updated over a week ago

This article lists the simple steps on how to pair or connect multiple dash cams to one phone. This can especially be helpful if you have multiple dash cams in different vehicles.



Nexar users with multiple vehicles often use a separate Nexar dash cam for each car. Nexar Classic is thoughtfully designed to facilitate smooth switching between dash cams. However, it's essential to note that connecting two or more Nexar dash cams to the app simultaneously is not possible. This limitation is because Wifi can only support one active connection at a time.

Since phones can only connect to one WiFi signal at a time, please make sure the phone is not connecting to any other WiFi networks. Please also disable any wireless CarPlay/Android Auto, VPNs, security, or antivirus apps, or hotspots when trying to connect.

How to Pair or Connect Multiple Nexar Pro, Beam, NEXC1, NEXC2, or NEXS1 Dash Cams to an iPhone?

Pairing or connecting multiple dash cams is not available for iPhones at the moment. However, you can pair a different dash cam to the app by unpairing the current one first.

Follow these steps to pair or connect a different Nexar Pro, Beam, NEXC1, NEXC2, or NEXS1 dash cam to an iPhone:

1. Open Nexar Classic.
2. Go to More > Dash cam > Pair a different dash cam.
3. Tap Continue to unpair.
4. Make sure the first dash cam is off, and plug the second dash cam into a power source.
5. Follow the on-screen instructions to pair the second dash cam to your phone.

How to Pair or Connect Multiple Nexar Pro, Beam, NEXC1, NEXC2, or NEXS1 Dash Cams to an Android Phone?

Please make sure to disconnect the first camera from its power source before pairing or connecting the second dash cam to an Android phone. Do this so it will not interfere with the WiFi connection between the second dash cam and your phone.

Then, follow these steps to pair or connect a different Nexar Pro, Beam, NEXC1, NEXC2, or NEXS1 dash cam to an Android phone:

1. Turn off the first dash cam.

2. Plug the second dash cam into a power source.
3. Make sure the dash cam’s indicator lights are on.
4. Turn on your phone’s WiFi, Location, and Bluetooth.
5. Open Nexar Classic.
6. Go to More > Dash cams > Tap Add another camera and follow the on-screen instructions.
7. The app will tell you to push a button twice on your dash cam as specified below:

  • For Nexar Light/Pro, Beam, and NEXC2 - press the dash cam’s Power button twice.

  • For NEXS1 - press the dash cam’s Sync button twice.

  • For NEXC1 - press the dash cam’s WIFI button twice.

8. Tap Verify.


Did this answer your question?