This guide lists the steps on how to turn on or turn off the audio recordings in videos for Nexar beam2.

To enable or disable audio recordings in your Nexar beam2's dash cam footage, follow these steps:

1. Connect the Nexar beam2 to a power source

2. Turn on the phone's WIFI

3. Wait until the blue/white power light on the Nexar beam2 turns solid

4. Open the Nexar Connect app and tap More > Settings.

5. Turn on or off the Audio recording toggle based on your preference

6. Start a drive. Let it record for a few minutes, and then end it

7. Check the Drive recording to ensure that the audio corresponds to the setting that you chose

Please note that changes made to the Audio recording toggle will impact both the Nexar Connect app and dash cam recordings. These changes will only apply to video recordings made after the toggle adjustment.