This article offers guidance if you're encountering problems with the Nexar beam2 dash cam not automatically powering on when you start your drive.

The Nexar beam2 should automatically power on once the vehicle turns on and you start driving. If this isn't happening, please follow the steps below:

1. Check for any physical damage on the accessories, and dash cam, such as signs of bloating.

2. If you are using the Nexar beam2 with a cigarette lighter adapter on a regular power source, ensure that the dash cam is charged for at least 45 minutes.

3. If you are using the Nexar beam2 with our OBD Kit or on a continuously powered port, check if the dash cam turns on when the vehicle starts moving.

If the issue continues, please reach out to our support team for further help. Providing the date and time when the issue occurred will greatly assist in resolving the problem.

If you notice your Nexar beam2 is swelling or bloating at the back, it may signal a failing internal battery. To avoid any issues, please stop using the dash cam and speak to our support team immediately for further assistance.

If you discover any physical damage to your Nexar beam2 accessories, please reach out to our support team for further assistance.

​